平法钢筋问题（Flat steel problem method）.docVIP

平法钢筋问题（Flat steel problem method） I. beam (1) frame beam First, the calculation of steel reinforcement 1, the upper through tendons The upper perforated rebar (rib 1 = length on long) through cross span long + two end bearing anchor value 2, end support negative ribs The negative length of end support: the first row is the anchor value of Ln/3 + end support; The second row is Ln/4 end support anchor value 3, lower reinforcement The reinforcement length = span long + about bearing anchor value The above three types of reinforcement are involved in the bearing anchor problem, then summed up the