大空间砌体结构现浇板的挠度与裂缝控制发（The deflection and crack of cast-in-place board space masonry structure control）.docVIP

大空间砌体结构现浇板的挠度与裂缝控制发（The deflection and crack of cast-in-place board space masonry structure control） Construction experience: the deflection and crack of cast-in-place board space masonry structure control released: St. learning network release date: 2009-12-22 Views: [395] small masonry structure] [large] [because of its brittle nature, the seismic performance of frame structure is relatively poor, if Party A does not have special requirements. On the floor we generally use cast-in-place concrete floor, which can improve seismic performance. However, cast-in-situ concrete slab usually cracks, especially under the condition of large space (more than 4200mm), if not handled properly, the crack width and deflection are relatively large, the structure safety and applicability of the serious threat, we must conduct a post processing. A lot of reasons, but the cracks are very complex, once the process will have a certain degree of difficulty, which requires us to strictly control in the design and construction of the integrated three aspects, prevention, anti and other measures, the three consideration, and to put prevention,. First, from the design point of view In todays society, the structural design of buildings is an important process necessary to build a building. It is the crystallization of the inheritance and development of social civilization. It can arrange the function of the building reasonably, consider the economy of the structure on the basis of guaranteeing the safety, and prevent the waste of the blind and unnecessary. However, the current design specifications focus on strength, and the temperature difference and concrete shrinkage characteristics are not taken into consideration. The cast-in-place concrete floor must meet the strength requirements according to the specifications and prevent damage due to insufficient strength. The large space cast-in-place concrete floor has a large thickness according to its strength, which causes its deflection and