建筑防渗漏（Building seepage prevention）.docVIP

建筑防渗漏（Building seepage prevention） Building seepage prevention I. a brief overview of exterior wall leakage prevention techniques In the exterior wall construction, the anti seepage work will be the key point of the exterior wall construction, and the detail treatment of the doors and windows, kitchen and toilet as well as the wall of the roof shall be the key link of the exterior wall. As a construction worker, when working in strict accordance with the GB50203-2002 masonry construction quality acceptance in the provisions of the operation, to give full attention to the quality of brick masonry, to advance water, the periphery of the wall should be full of knife ash masonry. For example, in the construction process, when the rainfall exceeds 10cm/h, the entire batch of water curtain wall form, then the net pressure wall is 70kg/ square meters, it may appear leakage, this is one of the main reasons caused by external wall leakage. Therefore, the construction technology and construction steps of each link has a direct impact on water, in order to ensure no leakage, on the wall for seepage prevention treatment, to the outer wall is easy to leak site, a comprehensive and objective understanding. Generally speaking, the anti leakage project of the exterior wall is a systematic project, so when the main body starts construction, it is necessary to take proper measures to make the building in a state of multi fortification. In the light of the construction of the building project, the corresponding anti-seepage techniques are elaborated separately in several structural locations. Two, door and window leakage prevention measures Belong to the doors and windows on buildings within the scope of activities, and the local area and the most, so leakage work difficulty is relatively high number of doors and windows, operation technology content requires not only the construction personnel is higher, and have a strong knowledge of architectural theory, the two in combination, can