慈星机头零件（Star head parts）.docVIP

慈星机头零件（Star head parts） A.Txt man should thank a woman who is more than 20 years old with her. Because 20 years old is the lowest point in a mans life, no money, no career; and 20 years old, but it is the most brilliant womans life season. As long as the hoe dance well, which corner can not dig? 1, needle, needle, triangle (push needle triangle): the role of the needle selector needle, the selected pin pushed to the A position. 2, needle selection: will not choose needle pressure into the needle board slot, so that it does not work. 3, needle guide triangle (lower guard Hill): act on the needle selected by the needle selector, push the needle pin to the H position. 4, select the needle back to the triangle: those selected by the needle press into the needle board select the pin, reset the initial state position. 5, dont press fabric: the spring needle pin B position is pressed into the needle plate, the needles forming fabric. 6, hanging head: compression spring needle pin H position, the needle form hanging head. 7, push the needle triangle (Die Shan): push the pin to the position of knitting or hanging. 8, needle triangle (Die Shan): turn the needle, needle, needle, needle trajectory. 9, pin pin position: H tablet compression, long pin compressed into the other side of the hill after the yarn. 10, Zhongshan block: normal knitting needle movement path. 11. Turn the needle: the triangle that causes the stitches to rise when the needle is turned. 12, degree triangle: move up and down, adjust the degree of order, so that the density to achieve tightness. 13, the guide needle triangle (intermediate retention triangle): the spring needle pin from the A position to the H position. 14, needle, needle, triangle: move the spring needle to the B position that has been moved to the H position. 15, turn the needle guide block triangle: turn the needle, turn the needle, needle movement. 16, two paragraph eye tablet: use two degrees of use. Computer knitting process analysis: 1.