sang（唱歌）.docVIP

sang（唱歌） Construction organization design 1 compilation basis 1.1 project bidding plan 1.2 contract of construction contract number: Beijing contract No. 1.3 design and construction drawings, engineering number: 97A29 1.4 geotechnical engineering investigation report (97, technique 071) 1.5 national standards and standards for construction and acceptance of construction works: Specification for construction and acceptance of concrete structure engineering (GB 5020492) Specification for construction and acceptance of underground waterproof Engineering (GBJ 20883) Specification for construction and acceptance of building ground engineering (GB 5020995) The reinforced concrete structure of the high-rise building construction procedures (JGJ 391) Technical code for roof engineering (GBJ 5020794) Standard for quality inspection and assessment of building construction (GBJ 30188) Construction procedure for winter construction (JGJ 104-97) Ribbed steel sleeve compression connection technical specification (JGJ 10896) Specification for welding and acceptance (JGJ 1896) Technical specification for glass curtain wall engineering (JGJ 10296) Specification for construction engineering measurement (DBJ 012195) The construction process of Building Engineering (DBJ012696) Construction safety inspection standard for evaluation (JGJ5999) 1.6 national and XX regulations and regulations 2 project overview This project is developed by XXXX and designed by XX company. Project is located in XX, the construction site, convenient transportation, location in XX road. The construction of the project is less than 0 and the structure and decoration of 0 or more two contract sections, with an interval of 2 months. In view of this situation, the content of this design is considered in two stages. Architectural profile: this project is a high-rise integrated commercial and residential building with a flat surface. The total construction area is 40095.4m2, of which the underground part is 11500 m2