ug5教程（Ug5 tutorial）.docVIP

ug5教程（Ug5 tutorial） UG default metric Ugii_env.dat settings inside. UGII_DEFAULTS_FILE=${UGII_BASE_DIR}\ugii\ug_metric.def UG unit change 1., the actual length of the unit change remains the same A., Unigraphics, NX-UG, Command, Prompt B. Cd UGII C. Ug_convert_part -in (-mm) XX.prt 2. is just numerical value, unit change Open the UG part file and enter Modeling. Expression-export generates XX.exp files UG Command Prompt Cd UGII Ug_convert_part -in (-mm) XX.prt Close UG part file, reopen the UG part file. Enter Modeling. Expression-Import, with, option (Replace, Existing) Enter the UGII directory, and the openUGII_env file changes the ug_english.def in UGII_MODELING_DEFAULTS_FILE=${UGII_BASE_DIR}\ugii\ug_english.def to ug_metric.def (part) Moldwizard installation Just put the MOLDWIZARD folder of the attachment together with the extracted file Moldwizard copy, C:\EDS\Unigraphics, NX\ System variable set UGII_USER_DIR=%MOLDWIZARD_DIR% Set MOLDWIZARD_DIR=C:\EDS\Unigraphics NX\moldwizard 1. Rotation: MB2 2. Translation: SHIFT+MB2 or MB2 + MB3 3. Zoom: CTRL, +MB2, or MB2 + MB1 4. When translating the coordinate system, you can perform exact positioning by pressing down the ALT key. 5. In drawing, you can create a narrow size by dragging SHIFT- on a linear dimension. 6. You can double-click the navigator or palette tags in the resource bar so that they can jump out and be placed separately. 7. As a sketch, the dotted line shows alignment with other objects, and the dotted line shows possible constraints. Use MB2 to lock the suggested constraint. 8. In graphics - when there is no active dialog box, you can drag the dimension to move its origin and automatically determine its lead side. 9. You can hold MB2 and drag to rotate the view. Use Shift+MB2 (or MB2+MB3) to translate. Use Ctrl+MB1 (or MB1+MB2) to zoom in / out. Even the sliding mouse can be used to scale! 10. In the outline outline, you can switch from the line to the arc by pressing / dragging MB1. Move the cursor t