【亚克力】有机玻璃粘接工艺操作技巧（[acrylic] organic glass bonding process skills）.docVIP

【亚克力】有机玻璃粘接工艺操作技巧（[acrylic] organic glass bonding process skills） [acrylic] organic glass bonding process skills The two pieces of acrylic board to be butted are placed horizontally on the operating platform, and the adhesive tape is affixed to the bottom of the seam until both sides are sealed. A gap no larger than the width is used to prepare the adhesive. Inject the acrylic adhesive evenly and slowly into the seam with the syringe until it is fully filled. Remove the adhesive tape when it is completely fixed. The facade bonding is the most widely used adhesive technology and is widely used in the manufacture of acrylic products. First of all, the surface will be bound to wipe clean, you can use pure water to wipe, but it is best not to use alcohol and other solvents scrub, otherwise easily lead to stress cracking. It is best to use a profiling in bonding sheet materials relatively large, can be fixed by adhesive, not easy to shift, is conducive to improve the bonding quality. Sheet thickness of less than the acrylic plate bonding, can be directly injected with a syringe from the side of the uniform and slow injection of acrylic adhesive, due to the role of capillarity, so that the flow of glue filled the entire sticky surface, you can complete the bonding. The thickness is greater than the acrylic plate bonding, first put a plate horizontal placed, in the bonding parts should be coated with adhesive, and then put the other side of the plate first angle, vertical can be completed bonding. If the quality requirements of bonding are very high, adhesive tape can be attached on the non bonding part, and the adhesive part shall be left and coated with adhesive, and then the adhesive shall be finished according to the operation mentioned above. After the adhesive is cured, tear off the adhesive tape. Then the surface of the stick is clear and transparent, and there is no trace of the adhesive on it. But this adhesive tape method is more troublesome, generally do not use