piet语言简介（Introduction to Piet language）.doc

piet语言简介（Introduction to Piet language） CC can point to the left or right. The DP and CC pointers often change the flow of the program. The interpreter passes the color filter as follows: 1. the interpreter selects the farthest edge of the current graph in the direction of the DP pointer (for example, the square DP pointer to the right, that is, the right column codel in the right direction) 2. according to the direction specified by the DP pointer of the CC pointer offset, select the farthest codel in this direction to this side. (inheriting the above example, if the CC pointer is to the left, select the top codel of the rightmost column codel. Because the left is up 3. now select a codel, the codel of the DP pointer, the first codel in the direction should be another color block. Now that you transfer the program to this new color box, this will prompt the execution of the command. (in short, you can imagine yourself standing on the program, first pressing the DP pointer to the farthest row / column codel on the current color grid). Then press the CC pointer to turn and move on to a specific codel. Then turn the DP pointer forward and take a step forward The process is repeated until the program is finished. Grammatical component number The total number of codel for each non black or white block represents a number. Note that non positive integers cannot be represented directly in such a way, although they can be constructed by commands. When the interpreter encounters some numbers, it doesnt do anything directly, especially if it doesnt automatically press the numbers into the stack. The push in operation is a distinct command. Black color blocks and edges The edge of the picture is considered a black color block. Black color limited program operation. When a program attempts to enter a black color swatch in accordance with a set of DP/CC pointers. The action will stop and will replace the CC pointer (left or right - left - right) and try again. If the two CC po