康佳总线1（Konka 1 bus）.docVIP

康佳总线1（Konka 1 bus） Enter the menu P2902T color TV factory According to MENU (menu) button to display the menu, the menu does not disappear before the press back button five times, will enter the factory menu. Enter the factory menu after the transfer of the FACTORY1-6 by MENU. Select the project with the program - we (keyboard selected into red), with volume +, - key to set the project parameters. Press again to look back at the health exit menu. S (SN) series Press the menu. Main menu appears, press 5 times to see the healthy you can enter the factory debug mode. According to 0 health, then look back at the factory exit health debug mode. Press the number keys with program options, select at Delta / program debugging, volume + / volume - debug data, and use the back button to confirm storage. CPU is a 5T45 LC863328A Konka A type machine Press menu button, then press the five game button (this process must be completed within 2 seconds), can enter the debug menu. Press the button to exit the game Konka CPU model is CKP1004S/CKP1010Ss E series The KK-Y131 user remote lower patch panel is opened, the bottom row of keys hole showed a hole on the left side of the join conductive adhesive, used as a FAC key. 1) according to the FAC button, the upper right corner of the screen display FACON, now has entered the factory debugging. 2) according to the need to choose according to the number keys 1, 2, 3, 4, 5, 6, 7, 8, then enter the corresponding menu. 3) press - key can display horizontal light, then press - button, the screen back to normal. 4) according to the program, the program debugging + key project selection. 5) the project volume, press the volume + key value adjustment. 6) after adjusting according to the FAC key to exit menu. Konka CPU type is A type machine LC863316A Reformed by the user remote controller KK-Y183B, which opened the remote lower patch panel, showing the bottom row of keys on the left side of the hole, the hole with conductive adhesive is used as