dos命令修改ip（Modify the IP DOS command）.docVIP

dos命令修改ip（Modify the IP DOS command） The DOS command to modify the IP.txt19 Ming can be understood as two moon sits in the sky, mutual care, mutual light, are indispensable, the Everfount light is connected to each other and bridge the link! This long journey filled with many bleak lonely, no friends who are living in the dark, and no friends who are the orphans. Microsoft Windows began to enter the market from the network operating system Windows NT, and now the Windows 2000 can be said that the network function is gradually perfect, in the growing process of Windows into a lot of other network operating system functions, can be said to be borrowed, and gradually formed a set of perfect functions of network operation this is the SUN system, and other major companies feel dissatisfied with the reason, think Microsoft is not completely self-sufficient in R D things. But the Windows2000 function is indeed very powerful, it can almost be like Unix and Linux on the command line to do a lot of work. Here we see a Windows can change the IP address in the command line commands, read the command you might think this command is like Unix and Linux orders, more like the Cisco router command. The following is my actual operation on the computer display, I will add some comments: C:\ipconfig (the first ipconfig this command see change before the IP address) Windows 2000 IP Configuration Ethernet adapter local connection: The Connection-specific DNS Suffix: IP Address.....: 192.168.0.250 (before the local connection changes IP) Mask. Subnet. And. 255.255.255.0. Default. Gateway. And. 192.168.0.1. PPP adapter dial-up connection: The Connection-specific DNS Suffix: Address.. IP. And. 211.149.128.147. Mask. Subnet. And. 255.255.255.255. Default. Gateway. And. 211.149.128.147. C:\netsh (and then execute the Netsh command) Netshinterface (Netsh command command) Interfaceip (interface command command) Interface ipset (interface IP command command) The following commands are available