车床前刀架拖板工艺规程设计及翻转式钻模夹具设计.docVIP

摘 要 本课题完成夹具的设计。 本课题来源于零件的生产制造。本课题要求对零件进行合理的工艺规程设计，包括零件每一道工序的选用设备、切削刀具、切削用量、定位方式等，要求对进行夹具设计。其目的是把所学的机械制造工艺，金属切削原理及工艺装备设计基础知识与计算机辅助设计方法结合起来，加强理论知识并锻炼实践和动手的能力。在课题的研究设计阶段，针对该零件的结构特点，制定加工工艺夹具的相关知识，结合零件的结构特点选择需要的夹具元件，设计出夹具的结构根据原理结合零件的结构特点确定零件在夹具中以一面定位计算夹具的定位精度与夹紧力保证零件在夹具上的加工精度然后绘图软件参考《夹具设计手册》绘制夹具元件的，完成夹具的设计。:加工工艺规程 工件定位  Abstract This topic study on the machining craft of the lathe former turret part, and make a reasonable process design, and completed the drilling fixture design of the lathe former turret part. This issue comes before the turret lathe extension unit parts manufacturing.This issue calls for the former turret lathe parts for a reasonable extension units, process planning, including the part of each working procedure of the selection of equipment, cutting tools, cutting consumption, positioning methods, and requested draw the process diagram.Another called for turning the former turret extension unit design and process planning for rotary drill fixture design touch. The aim is to have learned the mechanical manufacturing process, metal-cutting equipment, design principle and technology of basic knowledge and computer-aided design methods combined to strengthen the theoretical knowledge and practical training and hands-on capabilities. In order to cultivate students to be independent of the analysis of issues and problem-solving skills and lay a good foundation. In the design phase of the research projects, a process design for the structural characteristics of the part was developed; According to the structural features of components , understood the fixture knowledge deeply and selected the fixture components and completed the general structure of fixture design. According to the workpiece positioning theory, we choose the“ one surface and two pins ”positioning way to locate the part combined with the part structural characteristics. To ensure the machining accuracy of the part, we calculate the fixture positioning accuracy and the clamping force use