铸造涂料 铸造辅料（Casting coating, casting auxiliary material）.docVIP

铸造涂料 铸造辅料（Casting coating, casting auxiliary material） Cleaning agent (DQ-100) Overview: the product is an amine organic compound with a slight odor of amines. The utility model is suitable for the cleaning of metal core boxes, sand mixing machines (including agitators) and other metal utensils, and can be used for soaking metal surfaces which are difficult to be cleaned. DQ-100 cleaning agent has the advantages of high efficiency, low toxicity and little odor, but it can not be used in polyurethane, epoxy resin, rubber and other products. Physical property: Condition: having a slightly amine flavored liquid Density, g/cm3, 1.025-1.035 Flash point (closed cup) temperature 96 Instructions： 1. apply to metal core box, sand mixer (including mixer) and other metal utensils cleaning. 2., you can spray brush, wash, and resin scaling, thick places can be immersed in the cleaning liquid overnight, and then wash. 3. avoid contact with this product for a long time. It is better to wear gloves and other protective equipment when handling. Packing: drum, net weight of 200kg/ barrels. Storage and transportation: This product is easy to absorb moisture, pay attention to sealing when storing and storing, prevent damp, prevent bask in, keep in cool, dry and ventilated place. Shelf life: 12 months. DT series mould releasing agent (parting agent) Overview: DT series release agent can form a film between resin sand and mold or core box, which is not wetted by binder in resin sand, thus preventing sand sticking to mold. Features: 1. using DT series release agent can make mold and core easily disengaged. 2. the use of DT series release agent allows the core to be more uniform compaction density. 3.DT series release agent is quick drying type, without heating drying. 4.DT series release agent, volatile fast, high efficiency, spray can be repeated at one time, non stick mold, can effectively solve the resin sand, water glass sand mold problems. Variety and specification: Item number DT-1