道路桥梁课程（Road and Bridge courses）.docVIP

道路桥梁课程（Road and Bridge courses） Hydropower installation process and specifications. 1, switch and socket (including weak) and water supply and drainage arrangement: A (according to the design, layout and ceiling lighting layout) and the specific requirements of customers set; B, a professional kitchen facilities, from the factory to mark the location of draw cabinet or concrete wall; site map. C, location and routing to mark draw wall, please customers together to set the position and can satisfy the functional need for acceptance, and the acceptance confirmation form sign; Set the standard 2, switch, socket position (the following export as a benchmark, refers to the ground floor finish) A, room lighting switch position from the ground (finish) height is 1.1 meters, with the edge of the door from the door, must be 10 cm (edge of a house in the same position switch, socket height must be consistent, other positions should be avoided as far as possible to see the wall. Set in a convenient place to open import. B, a bedside switch from the ground (finish) height is 0.55 meters, the middle span is determined according to the size of the room and bed. Kitchen and toilet socket apart from the ground 0.3 meters, according to the functional position of cloth. C, TV and computer desk bookcase back wall socket, according to the TV cabinet and convenient customer habits and set the height and location. Kitchen set the switch socket, try to avoid the water point layout is reasonable. D, air conditioning socket height is 2.1~2.2 meters, should be as close to the corner, or according to the air conditioning set reasonable arrangement. Set the standard 3, drainage cloth set and air hole: A, water supply direction and height: the main water supply as soon as possible from the world, along the edge of corner tube: I. basin and wash basin to wash nozzle height is 0.45 meters, location according to customer needs, prohibited the use of buried pipe splicing tube. II. toilet or water t