自动扶梯和自动人行道监督检验内容要求与方法（Requirements and methods for supervision and inspection of escalator and escalator）.docVIP

自动扶梯和自动人行道监督检验内容要求与方法（Requirements and methods for supervision and inspection of escalator and escalator） Appendix 1: Requirements and methods for supervision and inspection of escalator and escalator test project project number Inspection contents and requirements Inspection method One technique art Capital material 1.1* The manufacturing unit shall provide the following materials and documents: A. type test certificate (copy); General layout of b.; C. installation, use and maintenance instructions; D. electrical schematic diagram and wiring diagram and safety switch diagram. Data access 1.2* The installation unit shall provide: A. construction record and self inspection report; Incident records and processing reports during the installation of b.; C. installation process, by the use of units proposed by the manufacturing unit agreed to change design documents. Data access 1.3* The transformation (overhaul) units in addition to provide 1.2 requirements of the content, should also provide the transformation (overhaul) main component part of the list, certificate and test report, a copy of part of the transformation by the transformation unit and approved drawings and data signature. Data access 1.4* The use of units shall provide the registration and management system (such as fault state rescue operation rules, escalator or walkway key use storage system etc.) data and equipment technical documents (including 1.1, 1.2 and 1.3 of the required materials, fault and accident maintenance, routine inspection records etc.). When the new equipment is checked and accepted, only the operation management system is checked. Data access Two drive move and turn towards station Two point one The engine room and the steering station shall have at least one standing area of 0.3m2, with a length of not less than 0.5m on the smaller side and without any fixed equipment. Visual inspection, measuring tape when necessary Two point two When the main driving device or brake is arranged be