变进给量振动钻削断屑的研究.pdfVIP

工具技术 变进给量振动钻削断屑的研究 朱晓翠 王丽慧 吉林大学 摘 要：应用压电陶瓷振动钻削装置，采用变进给量振动钻削的方法加工微孔。通过理论分析得出：变进给量 振动钻削有利于断屑，使切屑体积小，排屑顺畅。实验中选取黄铜作为加工材料，通过改变进给量进行孔径0．5mm 的分组钻削实验。将实验所得的切屑与普通钻削所得的切屑比较可知，变进给量振动钻削所得切屑长度远远小于 普通钻削的切屑长度，说明变进给量振动钻削优于普通钻削。 关键词：微孔，压电陶瓷，振动钻削，变进给量 study of Breaking Chip Adopted Vibration Drilling with Varying Feed-rate Zhu Xiaocui Wang Lihui Abstract：Vibration drilling device with piezoelectric ceramic is applied and vibration drilling with varying feed--rate is adopt-- ed to machine micro-hole．Through theoretical analysis we can conclude that vibration~lling with varying feed—rate is in favor of breaking chip，making the volume of chip small，and removing chips fluently．In the experiment，brass is chosen as work materi— a1．By varying feed—rate．group drilling experiments with drills of 0．5mm diameter have been carried out．Comparing the chip 0b— tained by the experiments with the one by ordinary drilling，a conclusion Can be generalized that the length of chip obtained by vi— bration drilling with varying feed—rate is much less than the one by ordinary drilling．So，vibration drilling with varying feed—rate is superior to ordinary drilling． Keywords：micro-hole， piezoelectric ceramic， vibration drilling， varying feed rate 术和工业生产的发展，微孔的应用越来越广泛，对微 1 引言 孔加工精度的要求也越来越高，一些尖端、新型产品 随着航空、电子、仪器仪表、精密机械等科学技 的微孔加工难度也在不断上升，对微孔加工技术提 出了更高的要求。 收稿日期：2007年6月 SOAP(简单对象访问协议)以及HTFP(超文本传输 主要研究任务是，在基于上述理论的基础上，利用面 协议)和FTP(文件传输协议)等网络通讯协议。 向对象的Visual C++编程语言来进行系统软件的 DOTNET能创造出真正的分布式网络服务，能整合 开发，并最终应用到实际中。 并协调为数众多的辅助程序，