志高空调故障（Chigo Air Conditioner Fault）.docVIP

志高空调故障（Chigo Air Conditioner Fault） 285, 325, 388, Chigo Air Conditioner fault code table 418: Including: 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 35, 40, 41 The contents of trouble running lights LED1 Running lights timing lights The indoor coil temperature sensor fault /8 1 seconds light shining The indoor temperature sensor fault /8 2 seconds light shining The outdoor unit fault 5 /8 seconds light shining The indoor fan fault 6 /8 second light shining 1, flashing a bright 0.5 seconds, 0.5 seconds off. 2, standby state detection, display the indoor coil sensor fault, the indoor temperature sensor fault. 3, if the indoor fan operation, for 30 seconds without feedback signal, turn off air conditioning and indoor fan fault display. In two, high crystal color series air conditioner fault code: Including: 02, 16, 18, 19, 20 The contents of the digital display shows fault code The indoor temperature sensor fault L2 switch state display, if at the same time show the fault code L1, repair immediately after the back room The indoor coil temperature sensor fault L1 The indoor fan fault L6 indoor fan operation, for 30 seconds without feedback signal is shut off and display L6 The outdoor unit fault E5 shutdown after E5 set temperature effectively, but no digital tube display, emergency or remote open / close button cough reboot, digital tube display at room temperature Three, the day series, a series of hook (51 and 51) models of fault code Including 25, 26, 42, 43, 45, 46, 47, 48, 50, 51, 52 The content of digital tube display state fault The indoor coil sensor fault E3 The indoor temperature sensor fault E2 Abnormal E4 outdoor unit The indoor fan fault E5 Frost DF Four, 18NV/24NV (5100-6600W): Chigo Air Conditioning Including: 17, 34, 36, 37, paragraph Fault content running lights LED1 Room temperature sensor shining 2 /4 seconds off the display NO LCD fault content 1 E1 IPM module failure 2 E2 compressor current is too high 3 E3 high temperature compressor 4 E4 outdoor