注塑机控制（Injection molding machine control）.docVIP

注塑机控制（Injection molding machine control） Control of injection molding machine Modern plastic injection molding machine is a typical system of machine, electricity and liquid in one, because of the characteristics of equipment with complex molding products, less processing, and processing various types of plastics, since its inception, development is very rapid, currently more than 80% of the worlds engineering plastic products are used in injection molding machine for processing. The traditional injection molding machine generally adopts the simple open-loop control, i.e. according to the preset value control. In the equipment manufacturing process, pre-set parameters, such as clamping force, cycle time and temperature, by the machine in the production process to be maintained. For example, the mold temperature can be maintained by controlling the heating temperature of the fluid, the plasticizing temperature by controlling the heating power can keep the device. However, this control method has the advantages of simple structure, anti-interference ability, control temperature is relatively low. At present, more injection molding machine is used in closed-loop control, according to the online measured value and the deviation of the set value control. The closed loop control system using negative feedback circuit, strong anti-interference ability, when the injection speed, injection pressure, mold temperature, mold cavity pressure, melt temperature and pressure deviation due to interference in the production process, the machine control system for automatic correction of interference by adaptive. This control method has strong anti-interference ability, high control precision. More advanced control method is to control the application of the computer, that is to build a closed-loop real-time computer control system. It includes the direct digital control system (DDC), supervisory computer control system (SCC), distributed control system (DCS) and several other types o