图纸会审要点（Drawing points）.doc

图纸会审要点（Drawing points） 1) Pre A audit points Design drawings and specifications are complete, there is no timetable for staging; Size, general layout and construction drawing plane position, elevation is consistent, the Whether the relationship between line drawing, the embedded part is clear; Engineering structure, details, construction methods and technical requirements are clear, and there is no contradiction between the current rules and regulations, whether the economy is reasonable; The quality requirements of building materials and sources are guaranteed; Geological exploration data are complete, ground treatment method is reasonable; Design of seismic intensity in compliance with local requirements; The fire safety requirements are met, there is no public security fire department approval; The construction safety is guaranteed; Indoor and outdoor pipeline arrangement, the elevation is reasonable; The requirements of design drawings and construction site can guarantee construction needs; Engineering quantity calculation is correct; To improve the design and construction of solutions. 2) professional examination Each unit in A. Based on the design requirements, shall organize relevant personnel, professional division of reading documents, further understand the design intent, quality standards and technical requirements; B. According to review the content of the professional, detailed drawings, check the problem, determine the current key. 3) content review A. All units based on professional review on the organization of the professional and technical personnel to discuss, analyze and check between the professional drawings, check each other there is no contradiction, leakage; B. A method is proposed for the treatment, solution or advice; C. Problems and recommendations will be respectively documented, the internal supervision and the Contractor shall triage before by supervisor shall be timely submitted to the design contractor, in order to design the contrac