屋面漏水防治法（Prevention and cure of roof leakage）.docVIP

屋面漏水防治法（Prevention and cure of roof leakage） Because of the varied roof shape, construction method, reasons of roof leakage are various. The roof leakage for different cases respectively discussed. A cast-in-place reinforced concrete plate, insulation layer on rigid waterproof roof leakage (1): Roofing roof frame structure as the main approach to 12 cm thick cast-in-place reinforced concrete roof structure layer, 6 ~ 10 cm thick pearlite insulating layer, 2 cm and 4 cm thick leveling layer of fine stone concrete rigid waterproof layer, the surrounding brick parapet, the roof fell as PVC organized within the drainage tube. (two): roof leakage leakage, especially embedded ceiling lamp junction box cast plate, more than half of indoor seepage, rain water seepage around the orifice. (three) processing method and analysis of the cause of leakage: 1, there are two reasons of cast-in-place slab leakage: cast-in-situ plate pre buried wiring box floating, the rain infiltration directly from the junction box; cast plate internal threading pipe floating top plate caused local cracks along the rain outside of the tube wall to the junction box. Control method: fixed on the template with a nail or wire plate internal threading pipe and connection box, etc, to ensure the cast-in-place board embedded within the material to maintain at the lower part of the slab, the plate inside the box, line pipe has enough concrete layer height, and the connection box configuration above reinforced net sure, box, above the pipe concrete cracking. Causes and prevention of cracking and seepage of rigid roof, 2: Cause: reinforced concrete reinforcement should be kept in the intranet on the surface of reinforced concrete under 1 cm, due to the construction of staff negligence, the fine stone concrete in reinforced concrete falls on the lower part of the upper rigid waterproof layer become concrete layer, resulting in cracking leakage of rigid waterproof layer. Control method: concrete, should be spec