TM57编译程序.PDFVIP

TM57编译程序 使用手冊 Rev V1.1 tenx reserves the right to change or discontinue the manual and online documentation to this product herein to improve reliability, function or design without further notice. tenx does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. tenx products are not designed, intended, or authorized for use in life support appliances, devices, or systems. If Buyer purchases or uses tenx products for any such unintended or unauthorized application, Buyer shall indemnify and hold tenx and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use even if such claim alleges that tenx was negligent regarding the design or manufacture of the part. TM57 C 编译程序使用手册 修改记录 版本 日期 描述 V1.0 Jan, 2013 新颁 1. 全局常数及函式可自定义在TABLE ROM 的起始地址 2. 使用pragma 指令来指定全局常数的地址 3. 在函数定义区段指定函式地址 4. 在内崁汇编使用假指令.fixcode冻结插入跨bank 指令 V1.1 Oct, 2013 5. 在指示表格中加入#pragma 6. 新增Pragma 指令(#pragma) 7. C 与汇编混合编程中应避免使用.org xx 指令 8. 新增在IDE 中新增一库函数项目的方法 UM-TM57XX_C_Compiler_S 2