机理探析自行走式隧道施工中装配式塑料管道合理支护形式试验研究.pdfVIP

学兔兔 钎 建廉 全国中文核心期刊 宜行走式隧道施工中装配式塑料管道 合理支护形式试验研究 卢清国，孙博，王庆学 (北京工业大学 建筑工程学院，北京 100124) 摘要：采用装配式塑料管道为新型自行走式隧(管)道施工提供配套支护技术，需要研究管道的支护强度、管道变形等相关参 数。将整体聚乙烯(PE)中空壁缠绕管沿管壁轴向切割成片，再焊接拼装成环。选择管道周向的分片数目和拼装角度作为试验的2个 因素，采用双因素实验方法，并参考管道环刚度测试方法，在环刚度试验机上对分片拼装后的管道进行承压实验。以塑料管道在径 向变形最大达到15％时的承载力为承载极限，经对实验结果分析后选出合理的管道拼装分片数目和角度。结果表明，拼装角度对强 度的影响最为显著，分片数目次之。合理支护形式为：管道周向均分成4片，并将4条分割缝分别置于与水平和铅垂方向旋转45。的 位置。 关键词：自行走式隧道掘进；塑料管道；分片拼装；分片数目；拼装角度 中图分类号：TU532+．61 文献标识码：A 文章编号：1001—702X(2010)01—0075—05 Experimental studies on rational support form of prefabricated plastic pipe in self-drive advancing construction LU Qingguo，SUN Bo，WANG Qingxue (College of Architecture and Civil Engineering．Beijing University of Technology，Beijing 100124，China) Abstract：Supporting strength．pipe deformation and related parameters of the prefabricated plastic pipe are to be studied to provide evidence for its application in supporting technology during serf—drive advancing construction．Separating the polyethylene (PE)hollow—wall twined pipes around the axial direction circumferential into slices，and welding into annular．Then，the number of slicing and the angle of assemb ling are chosen as the experimental influence factors．According to dual factors test approach，with the reference to the determination method of ring-stiffness，pressure test is conducted on the assemb led pipes by ring—stiffness testing machine．When the plas