教您如何别真假安踏运动鞋.doc

教您如何辨别真假安踏运动鞋　　本人从网上开始销售安踏到现在已经有些时间了，由于自己销售安踏　　接触安踏的鞋子。在这段时间里积累一些关于如何辨别真假安踏鞋的　　传授给广大购买安踏的忠实买家和潜在购买安踏的朋友们。　　第一：鞋子要很整洁干净　　第二：味道（安踏的胶水质量很好，正品的鞋子闻起来是一种原材料　　来的味道，而非正品因为用的胶水质量差，闻起来会有种刺鼻的味道　　第三：鞋底和鞋面的粘合处不会有溢胶(给人感觉很整洁） 　　第四：吊牌：（正品的吊牌上的货号是一起印出来的，而不是后来在　　检验员NO:必须有个透明的编号贴上去的。注：假货一般是没贴的。　　有贴。请从其它方面检测。　　第五：价格（大家为什么在网上买就是为了能省钱，正品的安踏网上的零售价基　　本都是市场价的六折至八折，少数专卖店的过季产品会有稍微低的折扣.一般在　　四折至五折。因为专卖店向分销商拿货一般都要五折，所以一般不会卖低于五折　　的价格）　　第六：鞋垫 （正品的鞋子的鞋垫上都会贴个“检”字）。 　　这六点基本是检测一双安踏鞋子是不是正品的鞋子了。　　很高兴从08年开始安踏的鞋子都上防伪，在鞋子的吊牌上有个涂层，上面有一　　组号码。这个号码是安踏所生产的产品上唯一的号码。等于每个产品的身份证号　　码。（注：真佩服造假厂家实力，据有关消息，有假鞋上也有防伪哦） 　　小秘诀：造假者为了谋取利润一般都会生产正品厂家的主打产品和经典的款式。　　所以购买的朋友们在购买这鞋款式的时候要多加小心。 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler o