行业授信策模板.doc

煤炭行业授信政策 一、行业定义 本政策所称“煤炭行业”是指按国家统计局《国民经济行业分类》（GB/T 4754-2002）标准中的相关行业，包括B06煤炭开采和洗选业、C252炼焦、H6361煤炭及制品批发。 二、行业特点 煤炭是我国主要的能源和重要工业原料，我国能源资源具有富煤、贫油、少气的特点，这一特点决定了煤炭在我国一次性能源消费中所占比例一直保持在70%以上。其中，电力行业是煤炭行业的第一消耗大户，占全部煤炭消费的50%，焦炭生产占比15%，钢铁行业占比9%，水泥行业占比5%，化肥行业占比1%。煤炭行业周期性波动特征明显，煤炭行业景气度与下游行业电力、冶金、化工和建材四个主要耗煤行业的周期性变化密切相关。 三、行业现状及发展趋势 2012年煤炭行业景气度较低，煤炭产量36.6亿吨，行业规模4.2万亿元，保持增长，但增速同比下降4.7%，行业经营收入下降，市场供给需求量增速回落，煤炭库存居高不下，2012年末，煤炭企业存煤8500万吨，主要港口存煤4352万吨，同比增加3120万吨，重点发电企业存煤8113万吨，可用天数保持在19天以上，煤炭企业去库存压力较大。据国家统计局2008-2012年行业数据显示，2012年煤炭行业呈现偿债能力有所下滑、盈利能力表现不佳、营运能力较差、成长能力回落的态势。 我国煤炭行业的“十二五”规划的工作重心仍以产业结构调整优化为主，深化煤炭企业改革，提高产业集中度控制东部地区煤炭开发强度，稳定中部地区煤炭生产规模，加强西部地区煤炭资源勘查开发公司广州恒运企业集团股份有限公司产业[2008年] 第15号 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into