complex hilbert transform filter复希尔伯特变换滤波器.pdfVIP

Journal of Signal and Information Processing, 2011, 2, 112-116 doi:10.4236/jsip.2011.22015 Published Online May 2011 (http://www.SciRP.org/journal/jsip) * Complex Hilbert Transform Filter 1 2 Juuso T. Olkkonen , Hannu Olkkonen 1The VTT Technical Research Centre of Finland, Finland; 2Department of Applied Physics, The University of Eastern Finland, Kuo- pio, Finland. Email: juuso.olkkonen@vtt.fi, hannu.olkkonen@uef.fi st th th Received March 21 , 2011; revised April 25 , 2011; accepted April 28 , 2011. ABSTRACT Hilbert transform is a basic tool in constructing analytical signals for a various applications such as amplitude modu- lation, envelope and instantaneous frequency analysis, quadrature decoding, shift-invariant multi-rate signal process- ing and Hilbert-Huang decomposition. This work introduces a complex Hilbert transform (CHT) filter, where the real and imaginary parts are a Hilbert transform pair. The CHT filtered signal is analytic, i.e. its Fourier transform is zero in negative frequency range. The CHT filter is constructed by half-sample delay operators based on the B-spline trans- form interpolation and decimation procedure. The CHT filter has an ideal phase response and the magnitude response is maximally flat in the frequency range 0 ≤ ω≤π. The CHT filter has integer coefficients and the implementation in VLSI requires only summations and register shifts. We demonstrate the feasibility of the CHT filter in reconstruction of the sign modulated CMOS logic pulses in a fibre optic link. Keywords : Hilbert Transform, Analytic Signal, Fractional Delay Filters 1. Introduction sponse is maximally flat in the frequency range 0 ≤ω≤π. Hi