基于PLC的家用车库自动门控制程序毕业论文.docVIP

攀枝花学院专科毕业论文 基于PLC的家用车库自动门控制程序 学生姓名： 学生学号： 院（系）：攀枝花学院工程技术学院 年级专业：2009级机电一体化技术2班 指导教师： 讲师 助理指导教师： 摘 要 随着汽车产业的发展，人们对车库的需求量日益增长。车库本文主要阐述了车库自动门的设计思想与程序编制此系统对车库的管理有很大的帮助、对疏导交通流量、提高道路通行能力有明显的效果，有很大的实用价值。 可编程控制器，车库控制系统，车库自动门，梯形图  ABSTRACT Along with the development of the auto industry, people on the garage ever increasing demand. Intelligent garage will information society is one of the most important infrastructure, parking management control system is an integral part of modern architecture. Along with the computer control technology development, the parking management control system function and hardware and software facilities also with his continuous development and improvement. This paper mainly expounds the design thoughts and automatic garage programming, the application of PLC controller as the field equipment signal acquisition and control. When their cars or master into the garage, when the car into the ultrasonic regional identity recognition relay work, garage door open, when the car to enter fully into the garage, delay 10 seconds after automatic garage door shut down; When the car to the materials, is located in the pressure inside the garage closing switches, garage door open, delay 30 seconds, automatic garage door lock, and realize the garage security, fire prevention, the pressure, and many other intelligent control. According to the management and control function demand, the full study related system components and working principle of the performance index, based on this system function design and hardware selection. The system of the garage management are of great help to transport the traffic flow, and the improvement of road transportation capacity have significant effects, have great practical value. Key words： PLC (programmable logic controller), Garage control system, Garage automatic door, Ladder diagram  目 录 摘 要 I ABSTRACT II 1 绪论 1 2 PL