410ADC8051F410ADC采集程序,利用中断同时采集两个通道ADC值.docVIP

410ADC8051F410ADC采集程序,利用中断同时采集两个通道ADC值 #define INT8U unsigned char #define INT8S char #define INT16U unsigned int #define INT16S int #define INT32U unsigned long #define INT32S long #include C8051F410.h // SFR declarations #include stdio.h #include Main.h #include ADC.h sfr16 TMR2RL = 0xCA; // Timer2 reload value sfr16 TMR2 = 0xCC; // Timer2 counter sfr16 ADC0 = 0xBD; // 12-bit ADC0 result INT16U NowAdcOne = 0; //第1通道ADC值 INT16U NowAdcTwo = 0; //第2通道ADC结果 INT8U NowAdcMode = 0; //当前转换的模式 INT8U AdcOver = 0; //转换完成标志 INT8U OneNumb = 0; //1号转换的次数 INT8U TwoNumb = 0; //2号转换的次数 INT8U OneAdcOver = 0; //1号转换完成标志 INT8U TwoAdcOver = 0; //2号转换完成标志 void ADC0_Init(void) //初始化ADC { P0MDIN = 0xF3; // set P0.2 P0.3 as an analog input P0SKIP |= 0x0C; // skip P0.2 P0.3 pin } void Timer2_Init (void) //定时器 { TMR2CN = 0x00; // Stop Timer2; Clear TF2; 选择为16位定时器 // use SYSCLK as timebase, 16-bit // auto-reload CKCON = 0x30; // select SYSCLK for timer 2 source 选择为系统时钟 TMR2RL = - (SYSCLK / 10800/12); // init reload value for 10uS 设置中断的频率 TMR2 = 0xffff; // set to reload immediately TR2 = 1; // start Timer2 启动工作 } void SetADC0_Init (void) //ADC初始化 { ADC0CN = 0x03; // ADC0 disabled, normal tracking, T2益出中断触发 // conversion triggered on TMR2 overflow REF0CN = 0x93; // Enable on-chip VREF = 2.2v and buffer IDAMRG=1合并IDAC0、IDAC1 //电