山东交通学院轮机论文.docVIP

山东交通学院海运学院 激光淬火对气缸套寿命的影响 专 业 轮机工程 届 别 2014 学 号 101612320 姓 名 孟小伟 指导教师　 丁业立 山东交通学院海运学院 二○一四年六月 原 创 声 (签Based on the comprehensive analysis of?domestic and international?laser processing technology,?the laser?quenching?machine?cylinder of diesel engine .The principle is the use of a laser beam scanning the work piece with high energy density, so that the irradiated metal in order to speed up above the transition point and lower than the melting temperature, when the laser beam from the irradiated area, due to the role of heat conduction in the substrate, cold the rapid cooling and self quenching then, the phase transformation hardening work piece table. This paper analyses the technical parameters of laser quenching cylinder diesel engine in theory, puts forward the calculation method of reticulate pattern hardening laser quenching several forms of 16V240ZJ diesel engine cylinder liner hardened with pitch. To investigate the mechanism of laser hardening can improve the service life of diesel engine cylinder liner, analyzed the temperature of laser quenching technique. Experimental study of 16V240ZJ diesel engine cylinder sleeve (boron alloy cast iron) effect of laser parameters of laser hardening of the surface of the cylinder liner of hardening, laser quenching after measuring the hardness, the observation and analysis of the hardening layer of the microstructure, morphology, and the wear test, the microscopic interpretation of laser hardening, verification the laser quenching can significantly increase the service life of the diesel engine cylinder liner. Keywords: laser quenching, the service life of cylinder liner, diesel, boron alloy cast iron, wear resistance 目 录1 1．机缸套表面激光淬火处理的工艺研究 2 1．1淬火系统组成 2 1．2柴油机缸套的表面预处理 3 1．3激光淬火网纹 4 2．光淬火温度场及提高柴油机缸套使用寿命的机理分析 5 2．1激光淬火硬化工艺温度分析 5 2．2激光淬火提高柴油机缸套使用寿命的机理 6 结 论 13 致 谢 14 参考文献 15 前 言 随着人民生活水平的提高，人们对于汽车、火车、船舶等内燃机交通工具的性能和使用周期提出