3W规则有效性仿真分析.pdfVIP

ea句钱 2011 年第 M 卷第7 期 -E珊珊..主熙雹南疆军- Electronic Sci. Tech. IJul. 15 , 2β11 3W 规则有效性仿真分析 张磊I ，李会武2 ，邱紫敬1 ，滑瑞霞1 ，郭倩I ，谢俊l (1.西安电子科技大学电子工程学院，陕西西安 710071; 2. 北京市昌平自来水有限责任公司中调室，北京 1022∞) 摘要利用HyperLynx 软件对3W 规则的有效性进行仿真分析，探索乎行微带线的线边距、线长度、介质厚度 和介电常数等因素对串扰的影响。分析结果表明，一般情况下， 3W 规则可以减小约 703岛的串扰，选取合适的平行微 带线参数，可以使3W 规则发挥更好的效果。 关键词 3W 规则;串扰; PCB; 微带线 中图分类号 TN91 1. 7j T归9 1. 9 文献标识码 A 文章编号 1∞7 -7820(2011 )07 -112 -05 Simulation Analysis about the Effectiveness of the 3 W Rule ZHANG Lei 1 , LI Huiwu2 , QIU Zijing 1 , HUA Ruixia 1 , GUO Qian 1 , XIE Jun 1 (1. School of Electronic Engineering , Xidian University , Xian 710071 , Chinaj 2. Central Control Room , Beijing City Changping Water Co. , Ltd , Beijing 102200 , China) Abstract 3 W rule is an experiential method of the routing which is used to reduce the crosstalk of the tracks on printed circuit board. The study of its effectiveness is valuable for engineering application. In this paper , we use HyperLynx software to simulate the effectiveness of the 3 W rule , and explore the impact of some factors , such as line margins , line length , dielectric thickness and dielectric constant of the parallel microstrip on the crosstalk. The results indicate that the 3W rules can reduce about 70% of the crosstalk in generally. therefore selecting the appro- priate parameters of the parallel microstrip line can make the 3 W rule work better. Keywords 3 W rule; crosstalk; printed circuit board ( PCB); microstrip line 随着电子产品设计的高速化和小型化趋势。