research on ossicular chain mechanics model研究小骨的力学模型.pdf

Hindawi Publishing Corporation Mathematical Problems in Engineering Volume 2010, Article ID 261826, 14 pages doi:10.1155/2010/261826 Research Article Research on Ossicular Chain Mechanics Model Wen-juan Yao,1, 2 Hua-cong Zhou,1 Bao-lin Hu,2 Xin-sheng Huang,3 and Xiao-qing Li1 1 Department of Civil Engineering, Shanghai University, Shanghai 200072, China 2 Shanghai Institute of Applied Mathematics and Mechanics, Shanghai 200072, China 3 ENT Department, Zhongshan Hospital, Fudan University, Shanghai 200032, China Correspondence should be addressed to Wen-juan Yao, wenjuan@ and Xin-sheng Huang, huangxinsh@ Received 30 November 2009; Revised 12 March 2010; Accepted 28 March 2010 Academic Editor: Carlo Cattani Copyright q 2010 Wen-juan Yao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. On account of the complex structure of the middle ear and that it is more difficult to carry out experiments to test the nature of the mechanical components, the relevant data is hard to obtain, which has become an obstacle restricting analysis of the middle ear mechanic. Based on spatial structure and mechanical properties of ossicular chain, the paper has established functional relationship between load and members displacement with elastic principles and variation principles, in order that experimental results will be reflected in mechanical model. In the process of solving equations, we use the experimental data of a known special point or the various components function of statistical regression method and