signal processing and sampling method for obtaining time series corresponding to higher order derivatives信号处理和抽样方法获取时间序列对应于高阶导数.pdfVIP

Hindawi Publishing Corporation Mathematical Problems in Engineering Volume 2010, Article ID 913147, 9 pages doi:10.1155/2010/913147 Research Article Signal Processing and Sampling Method for Obtaining Time Series Corresponding to Higher Order Derivatives Andreea Sterian1 and Alexandru Toma2 1 Department of Physics, Politehnica University, 313 Spl. Independentei, 060042 Bucharest, Romania 2 Department of Informatics, Titu Maiorescu University, 187 Cl. Vacaresti, 040051 Bucharest, Romania Correspondence should be addressed to Alexandru Toma, vimarelectro@ Received 27 January 2010; Accepted 19 February 2010 Academic Editor: Ming Li Copyright q 2010 A. Sterian and A. Toma. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. For modeling and controlling dynamic phenomena it is important to establish with higher accuracy some significant quantities corresponding to the dynamic system. For fast phenomena, such significant quantities are represented by the derivatives of the received signals. In case of advanced computer modeling, the received signal should be filtered and converted into a time series corresponding to the estimated values for the dynamic system through a sampling procedure. This paper will show that present-day methods for computing in a robust manner the first derivative of a received signal using an oscillating system working on a limited time interval and a supplementary differentiation method can be extended to the robust computation of higher order derivatives of the received signal by using a specific set of second-order oscil