stereo video transmission using ldpc code立体视频传输采用ldpc码.pdf

I. J. Communications, Network and System Sciences, 2008, 3, 207-283 Published Online August 2008 in SciRes (http://www.SciRP.org/journal/ijcns/). Stereo Video Transmission Using LDPC Code Rui GUO, Lixin WANG, Xiaoxia JIANG Communication College, Hangzhou Dianzi University, Hangzhou, China Email: hbsyrgr@ Received on April 16, 2008; revised and accepted on August 18, 2008 Abstract Stereo video is widely used because it can provide depth information. However, it is difficult to store and transmit stereo video due to the huge data amount. So, high efficient channel encoding algorithm and proper transmission strategy is needed to deal with the video transmission over limited bandwidth channel. In this paper, unequal error protection (UEP) based on low density parity check (LDPC) code was used to transmit stereo video over wireless channel with limited bandwidth. Different correction level LDPC code was used according to the importance of video stream to reconstruction at the receiver. Simulation result shows that the proposed transmission scheme increases the PSNR of reconstructed image, and improves the subjective effect. Keywords: Stereo Video, LDPC Code, UEP, Data Partion, EEP 1. Introduction 2. Bits Stream Structure and Data Partition of Stereo Video Stereo video is widely used because it can provide depth information in stereoscopic television, video conference, Conceptually, the structure of H.264 encoder is divided remote control, telemedicine and other fields [1,2]. into two layers: Video Coding Layer (VCL) and Network However, it is difficult to store and transmit stereo video A