精工S8254锂电池保护IC.docVIP

Rev.3.5_00  BATTERY PROTECTION IC FOR 3-SERIAL OR 4-SERIAL-CELL PACK  S-8254 Series  The S-8254 series is a protection IC for 3-serial or 4- serial cell lithium-ion / lithium polymer rechargeable batteries and includes a high-accuracy voltage detector and delay circuit. The S-8254 series protects both 3-serial or 4-serial cells using the SEL pin for switching. Features (1) High-accuracy voltage detection for each cell · Overcharge detection voltage n (n = 1 to 4) 3.9 to 4.4 V (50 mV steps) Accuracy ± 25 mV · Overcharge release voltage n (n = 1 to 4) 3.8 to 4.4 V*1 Accuracy ± 50 mV · Overdischarge detection voltage n (n = 1 to 4) 2.0 to 3.0 V (100 mV steps) Accuracy ± 80 mV · Overdischarge release voltage n (n = 1 to 4) 2.0 to 3.4 V*2 Accuracy ± 100 mV (2) Three-level overcurrent protection · Overcurrent detection voltage 1 0.05 to 0.30 V (50 mV steps) Accuracy ± 25 mV · Overcurrent detection voltage 2 0.5 V Accuracy ± 100 mV · Overcurrent detection voltage 3 VC1 − 1.2 V Accuracy ± 300 mV (3) Delay times for overcharge detection, overdischarge detection and overcurrent detection 1 can be set by external capacitors (delay times for overcurrent detection 2 and 3 are fixed internally). (4) Switchable between a 3-serial cell and 4-serial cell using the SEL pin (5) Charge/discharge operation can be controlled via the control pins. (6) Withstanding voltage element Absolute maximum rating : 26 V (7) Wide operating voltage range 2 to 24 V (8) Wide operating temperature range (9) Low current consumption − 40 to + 85 °C · Operation mode 30 µA max. (+ 25 °C) · Power-down mode 0.1 µA max. (+ 25 °C) (10) Lead-free products *1. Overcharge hysteresis voltage n (n = 1 to 4) can be selected as 0 V or from a range of 0.1 to 0.4 V in 50 mV steps. (Overcharge hysteresis voltage = Overcharge detection voltage − Overcharge release voltage) *2. Overdischarge hysteresis volt