化工原理 第十章-干燥 讲义（Tenth principles of Chemical Engineering - drying handouts）.docVIP

化工原理 第十章-干燥 讲义（Tenth principles of Chemical Engineering - drying handouts） This article by ANN Sakura contribution Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Tenth chapters Feeding Dry To separator discharge Distributor hot air Single cylinder boiling bed dryer School of chemical and materials engineering, Department, of, Chemical, and, Materials, Engineering 10. 10.1 overview 10.1.1 drying purpose, essence and classification 10. drying purposes, 10. 10.1.1.1 the purpose is to remove wet solids from moisture (water or other liquids) and wet them. Remove wet solids from wet parts (water or other liquids) - dewetting. Go to the wet wet wet method: Methods: mechanical dewetting, namely through pressing and filtering, (1) mechanical dewetting, namely by pressing, filtration and centrifugal separation method to wet, this is to wet method of low energy consumption, but the moisture removal does not end this is a low energy consumption to the whole wet method. Heat moisture, moisture vaporization by means of heating the material, (2) to wet heat, moisture vaporization by means of heating the material, and the method of steam vaporization produced by inert gas or vacuum away removed by suction, the generated steam away or suction is removed by vacuum method this method is referred to as inert gas, dry. The method is referred to as drying. Dry School of chemical and materials engineering, Department, of, Chemical, and, Materials, Engineering 10. the essential nature of 10.1.1.2: Nature: the process of transferring water from the material surface to the gas phase. Process. The drying process is a combination of mass transfer and heat transfer (heat and mass transfer), and the drying rate is controlled by mass transfer at the same time. The heat transfer rate and mass transfer rate are governed. The heat transfer rate and mass transfer rate are dominated. Necessary cond