iqc检验员日常工作要点（IQC inspectors daily work points）.docVIP

iqc检验员日常工作要点（IQC inspectors daily work points） IQC inspectors daily work points, Post, By:2008-10-22, 18:50:00 IQC inspectors daily work points First, the purpose: to specify the specific requirements of the work, what should be done? How can I do it well?. To improve work and be a good quality controller. Two, content: 1 、 maintenance and maintenance of instrument and equipment, daily maintenance list signing. (5 minutes before the start of the morning.) 2 、 responsible for the maintenance of equipment (use and storage), sampling materials (clear items, good and bad products), work area (environment and data, sample placement, etc.) 5S maintenance. (checking and correcting at any time) 3, work discipline consciously abide by: no late work, leave early, work without gossip, go to work, do nothing related to work, as well as obey the superior arrangement and company rules and regulations. (pay attention to correction at any time) 4, the standard control, professional and technical level and the correct use of equipment are the premise of the inspection work. To continuously improve work ability. Be clear about the standard requirements of the material in charge and the status of incoming materials. 5, the idea: the more complaints, the more problems, because we did not do a good job. Change is to start from a little bit of everything, and now do a thing, there will be less a complaint, and on the contrary, there is a complaint. We are not doing a bad job, but because we are not in the right direction, the method is not correct, the implementation is not in place, professional level is not enough, no intention to do. 6. Keep a good environment and a good mind at all times. We will start a full day inspection. Our job is to detect and control nonconforming products in advance. 7, the first step of the inspection is to single, material manufacturers, names, specifications, material number must be carefully checked. Next, the sample, acknowledgment book, job sheet data,