smt品质（SMT quality）.docVIP

smt品质（SMT quality） [SMT post operation specification] I. operation specification of SMT material operator 1, order view After receiving the order, the material keeper should check the contents of the order in detail, especially the notes. To understand the PC scheduling, to understand the warehouse stock preparation, for the less part should pay special attention to record and report to the supervisor. 2, material Do the correct and accurate quantity, material specifications in a timely manner. All the material documents to be preserved. Substitute materials for engineering documents and do not accept verbal forms. The detailed operation method is referred to SMT material control measures. 3, issue For IC and other class a materials, timely delivery, quantity accurate, especially for night shift material release work, need to check the night production schedule, and then release materials. For the use of materials, attention should be made clear (such as replacement material, material shortage, the amount of IC distribution, etc.). 4, material management system Put all the materials on the material rack, make clear the classification, control the inventory quantity in time, especially for the material shortage to be recovered in time. The cover is placed with glue frame and clearly marked. Materials room should be good anti-theft work, lock the door at any time. The keys are put on the night shift after work. 5, feeding For the operators missing IC, the daily feed list should be opened (to be paid until the bill is paid). For other materials, the material should be filled every Friday. For the part of machine loss, the amount of wear and tear should be mastered in time, and the materials should be supplied in time. 6, warehousing All PCBA warehousing should be clearly identified and clearly identified in quantity, especially ROHS products. Each warehouse after completion of timely accounts, so as to clear control. Usually two times a day, at 10 a.m. and at night, be