几种通讯协议差异，特点.ppt

* * * * What is FCS, elaborate here * What is the point of bring H1 if we don’t have much products, change this to NetLinx architecture! * * * * * * * * * * * * * * * DeviceNet speed at 5K and 1M???? 125K, 250K and 500K only * * * * * * * * Now that we’ve told you the benefits of P/C, which networks today utilize this superior technology? FIP WorldFIP, primarily promoted in Europe for fieldbus applications. (Telemechanique invented FIP). Foundation Fieldbus (both H1 H2). This is the ISA/IEC digital standard to replace 4-20mA signals supported by over 200 suppliers world-wide, including A-B. C-Net, with SMAC ASICs designed by A-B which will be sold to any vendor unscreened. D-Net, based on CAN. NOTE: SDS, marketed by MicroSwitch, is also CAN-based and employs the P/C model. There are significant drawbacks, however, with the SDS protocol as defined by MicroSwitch that severely limits the functionality of the network. Also note: A-B “legacy” networks (DH+, DH485, RIO) are S/D-based !! * * * * again, DeviceNet is 125K, 250K and 500K, not 125Kto500M, be precise. Also, DeviceNet is not twisted pair cable, is 5 (or 4) wires. * * * DeviceNet总线慨述 多主工作方式： 节点无主从之分，以多主方式工作， 任一节点可以在任意时 刻向总线上的节点发送信息。 非破坏性总线仲裁技术： 多个节点同时向总线上发送信息时， 优先级低的主动后退，而优先级高的继续传输。 通信方式： 点对点，一点对多点，全局广播。 用途： 主要用于工业自动化，制造自动化，机械自动化。 DeviceNet总线层次 应用层 7 表示层 6 会话层 5 传输层 4 网络层 3 链路层 2 物理层 1 OSI 未使用 链路层 2 物理层 1 DeviceNet 应用层 7 简洁高效 DeviceNet总线物理层 传输速率：125KBPS~500MBPS (取决于传输介质和传输距离) 传输介质：双绞线 传输距离：双绞线500m /125KBPS ~~125m /500KMBPS 拓扑结构：总线型,树型 节点个数：64个/段 物理功能：位编码/解码，位定时，同步 DeviceNet总线数据链路层 逻辑链路控制层(LLC) ： 帧接收滤波 帧超载通知 帧恢复管理 介质访问控制层(MAC) ：