Flowmaster汽车热管理应用介绍.pptVIP

直接将温度显示在实物的相应位置 Question?Contact: wgj@ This presentation is intended for existing users of Flowmaster. The users could be using V6 or V7, this presentation intends to give a relatively detailed summary of the new technical capabilities included in V7.6. * * The automotive industry is a tightly regulated, competitive, cost conscious industry that produces some of the most complex products in the world. Each OEM and Supplier face enormous challenges in bringing a product to market and technology is one tool that is increasingly being used to help reduce costs and lead times, manage complexity, increase quality and ultimately drive profits. In developing the industry configurations of our Flowmaster product we spoke with our automotive customers and discussed their development methods and processes both today and the ones they want in the future. The basis of these discussions and how technology can help deliver those processes became our vision for the Automotive Release of Flowmaster. * * * * Roland Berger Strategy Consultants and Prof. Erich Schelkle * * * * * * * * Segmented controllers; The segmented controllers at V7.6 will allow a much more detailed dynamic interaction between Flowmaster and CFD (via CFDLink or MpCCI). Not only can Velocity Profiles, etc be imported “offline” as a surface for use in Steady State, as in earlier versions of Flowmaster, but it will be possible to control an array of values that vary dynamically in a Transient simulation. The CFD software will also be able to read a grid of values from a segmented component in Flowmaster to act as a dynamic boundary condition in the CFD tool * * 图示为发动机冷却系统、空调系统耦合模型，其中包括了乘员舱模型。若需精确对乘员舱舒适性进行分析，可采用一维与三维耦合分析的方法，一维计算管内流动，算到出风口为止，三维计算舱内的场，得到不同位置的温度、风速、湿度等。 * Flowmaster开放性良好，支持二次开发。图为国外某客户自行开发的界面，将仪表盘和操作面板放在虚拟的仿真平台下，可以实时看到舱内的温度、压力、湿度等的变化 * ? 2007 Flowmaster Group All information is contained in this document is confidential – do not distribute without prior authorisation ? Flowmaster Group ? Fl