dm修复硬盘零磁道(转)（DM repair hard disk zero tracks (turn)）.doc

dm修复硬盘零磁道(转)（DM repair hard disk zero tracks (turn)） You can look at the picture, understand the repair of 0 tracks, damage to the hard disk detailed process, master the repair method. As for the repair, the principle is to move the 0 sector backward, so that the system no longer detects 0 sectors, and directly reads the MBR (master boot record) from the specified sector in the back. Lets start together. First of all you need is a Win98 boot floppy and with a PCtools9.0 CD (these two things, the former is a good production, which can be downloaded to PCTools9.0 and then burn it to a CD), of course, need to repair the hard disk is connected to the computer, then you can begin. The Win98 boot disk in the floppy drive, booting the system, and then put the disc prepared with PCtools9.0, DE into the CD-ROM directory and run DE, then the software will prompt that software is running in read-only mode, after defining the software will require you to select a file open, of course, our purpose do not edit the file, but the software runtime required to open a file, so here we choose a file to determine the open can, because we must modify the disk effect so the first thing we need to do is to remove the software in read-only mode, press Alt and select the menu Options (options) in Configuration (configuration), as shown in Figure 5 into the picture, through the Tab switch to Read Only (read only), press the spacebar to remove Read Only (read-only) before the hook, and then determine the following In the press Alt and select the menu Select (select) in the Drive (driver), Drive type (Physical Xuanli drive type) item (physical) and use Tab to switch to the Drives (driver) and Hard Disk (inside the hard disk) and then choose OK and press enter, then back to the main menu, open the Select (select) menu, then there will be Partition Table (partition table), select and enter into, after you can see the partition table information, if the hard disk is divided into primary and extend