fanuc 系统功能介绍-中英文对照（FANUC system features - Chinese and English controls）.doc

fanuc 系统功能介绍-中英文对照（FANUC system features - Chinese and English controls） FANUC system features - Chinese and English controls 1. Control the number of tracks (Controlled, Path), CNC control the feed servo axis (feed) number of groups. When machining, each group forms a tool path, and each group can move independently or coordinate movement at the same time. 2 control axis number (Controlled, Axes) CNC control the number of feed servo axis / each trajectory. 3, the number of linkage control axis (Simultaneously, Controlled, Axes), each trajectory at the same time interpolation of the number of feed servo shaft. 4, PMC control shaft (Axis, control, by, PMC) by PMC (programmable machine tool controller) control feed servo shaft. The control instructions are programmed in the PMC program (ladder diagram), so the modification is inconvenient, so this method is usually used only for the fixed feed axis control with moving quantity. 5, Cf axis control (Cf, Axis, Control) (T Series) lathe system, the spindle rotation position (corner) control, and other feeding shaft, by the feed servo motor implementation. The shaft is linked with other feed shafts to interpolate and process arbitrary curves. 6, Cs contour control (Cs contouring control) (T Series) lathe system, the spindle rotation position (corner) control is not using feed servo motor and FANUC spindle motor. The position of the spindle (angle) installed in the spindle (not spindle motor) detection of high resolution encoder, the spindle is as servo axis, velocity: degrees / minutes, and together with other axis interpolation processing, contour curve. 7, Rotary axis control axis, the feed shaft is set as a rotating shaft for angular position control. The angle of gyration is set to any parameter. The FANUC system is usually just a feed shaft other than the basic axis and can be turned into a rotating shaft. 8. The control shaft is disengaged (Controlled, Axis, Detach) to specify the control of a feed servo shaft out of