工程测量员-gps外业作业流程（Engineering surveyor -gps external operation process）.doc

工程测量员-gps外业作业流程（Engineering surveyor -gps external operation process） Engineering surveyor -GPS field operation process Surveying and Mapping Surveying and mapping instrument equipment business - commerce platform The gold recharge free registration user login and user registration user login registered VIP books The news information software companies offer products supply business recruitment expert Talent Forum blog pages You are at home, this paper, GPS: welcome to visit outside the industry process of Surveying and mapping business channel GPS field operations Author: unknown source: Online Collection Update: 2008 25 March 05 1. network planning and time arrangement: The distribution of GPS network planning and control points, to make the whole network uniform point of error, the best shape of the network according to the distribution of control points of planning: (1) the distribution of control points of the plane: Test area network: the best there are at least three known control points distributed in four quadrant area periphery, if known triangle point (control point) in the test area outside, measuring the distance and the outer zone is known the best not more than 20km. Linear measurement area: the best there are at least three known control points distribution in the test area of the two ends and central, and every 30km has a best known control point. (2) elevation control points distribution: Network survey area: in general, there are 4 known level points as control points in each 10km*10km range of domestic demand, and distributes in the survey area around. If the higher the elevation accuracy, on the number of test area encryption level elevation control points, usually measured with known level are preferably not more than 5km. Linear measurement area: the best there are at least four known control points distribution in the test area of the two ends and central. When the linear measurement area is large, with known level points as control points in