家庭装修工艺流程（Family decoration process）.docVIP

家庭装修工艺流程（Family decoration process） Construction technology, carpentry works 1, door: door from the specified factory custom, mainly uses dry pine, camphor wood MDF and selected decorative panels, with Environmentally friendly white latex adhesive, by hot press pressure after 20 minutes, the surface stress is uniform and smooth, not easy to deformation, and then The plane straight round the door according to the size, with solid lines closed the door. On-site production must comply with the above provisions. 2 sets of doors and windows: big core board substrate, decorative panel with the selected, 9 per cent of MDF substrate with door mouth, the selected solid exterior Wood door closing requirements founder, corner should be smooth, tight, on line, hang the hinge to the reinforcement, the door should be installed in At the opening, the door can not hit the line (kitchen and toilet door line to brush the bottom lining waterproof coating). 3, gypsum board ceiling: dry wooden keel frame, a special shape of the increase with the use of core board, gypsum board cover requirements Smooth surface, joint 0.5mm seam gypsum powder filled, cloth, with screw fixed gypsum board, above rust Paint. 4, aluminium Kouban ceiling keel do: special hanger, 0.6mm thick aluminum plate cover, special Aluminum Alloy edgebanding collection While, the requirements of surface roughness, the gap is not too large, the shape and color to meet the design requirements. 5, the wooden ceiling: lining frame with dry wooden keel and big core board, veneer cover selected, wood (or decorative line closing In 45 degree angle bump), lining frame to brush fire retardant coating, lining frame fixed with bolts. 6, gypsum board partition: light steel keel or dry wooden keel frame, dragon gypsum board cover frame, vertical keel clearance 40mm, conform to the requirement of construction specification, solid, smooth surface, the gap filling gypsum putty plaster cloth. 7, cement pressure plate partition: dry woode