讲焊接技术（Talking about welding technology）.docVIP

讲焊接技术（Talking about welding technology） 2H311040 welding technology 2H311041 master the selection and evaluation of the welding process First, the purpose of welding procedure qualification standards and selection principle The purpose of evaluation of welding process The ability to verify correctness and evaluation of application of welding process unit to welding unit. Two, the welding procedure qualification requirements (a) General requirements 1. welding process assessment should be based on reliable steel welding performance as the basis, and prior to the completion of the welding engineering. Under what circumstances do not need to do the welding procedure qualification? There is clear guidance parameters of welding process for welding has been fully understood and used for a long time and has the practice of domestic and foreign production of mature steel, generally do not need welding test by construction enterprise. Need to do the welding procedure qualification and under what circumstances? For the domestic development and production of new products, or imported from abroad without steel used, should provide steel welding test evaluation data. Otherwise, the construction enterprises should collect the relevant data, and welding test, so as to determine the qualification of welding procedure parameters. The 2. WPS general procedure To weld specimen and specimen preparation, test specimen and specimen to determine whether the welded joints with the use of performance, the required welding technology evaluation report, put forward to develop the welding process instruction of welding process instruction and assessment. 3. the welding procedure qualification of equipment and instrument should be in normal working condition, steel, welding materials must conform to the relevant standards, by the unit of skilled personnel of the unit welding welding specimen welding equipment. 4. in charge of assessment work and personnel to carry out comprehensive evaluation o