response analysis on electrical pulses under severe nuclear accident temperature conditions using an abnormal signal simulation analysis module电子脉冲响应分析严重核事故温度条件下使用异常信号仿真分析模块.pdfVIP

Hindawi Publishing Corporation Science and Technology of Nuclear Installations Volume 2012, Article ID 656590, 15 pages doi:10.1155/2012/656590 Research Article Response Analysis on Electrical Pulses under Severe Nuclear Accident Temperature Conditions Using an Abnormal Signal Simulation Analysis Module Kil-Mo Koo,1 Jin-Ho Song,1 Sang-Baik Kim,1 Kwang-Il Ahn,2 Won-Pil Baek,3 Kil-Nam Oh,4 and Gyu-Tae Kim5 1 Severe Accident and PHWR Safety Research Division, Korea Atomic Energy Research Institute, 150 Dukjin-dong, Yusong-gu, Daejeon 305-353, Republic of Korea 2 Integrated Safety Assessment Division, KAERI, 150 Dukjin-dong, Yuseong-gu, Daejeon 305-353, Republic of Korea 3 Nuclear Safety Research Headquarter, KAERI, 150 Dukjin-dong, Yuseong-gu, Daejeon 305-353, Republic of Korea 4 Department of Optical Communications Engineering, Gwangju University, 52 Hyuodeok-ro, Nam-gu, Gwangju 503-703, Republic of Korea 5 Department of Electrical Engineering, Korea University, 5ka, Anam-dong, Sungbuk-ku, Seoul 136-701, Republic of Korea Correspondence should be addressed to Kil-Mo Koo, kmkoo@kaeri.re.kr Received 7 December 2011; Revised 19 March 2012; Accepted 19 March 2012 Academic Editor: Gilberto Espinosa-Paredes Copyright © 2012 Kil-Mo Koo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Unlike design basis accidents, some inherent uncertainties of the reliability of instrumentations are expected while subjected to harsh environments (e.g., high temperature and pressure, high humidity, and high radioactivity) occurring in severe nuclear accident conditions. Even under such conditions, an electrical