ros脚本大全（ROS scripts）.docVIP

ros脚本大全（ROS scripts） ROS script Daquan (generic) Post By:2010-3-13 10:11:37 [just see the author] This article summarizes some of the commonly used ROS script, in the hope that everyone will help! Speed limit script : for, wbsz, from, 1, to,, do={/queue, simple, add, name= (wbsz. $wbsz), dst-address= (192.168.0.. $wbsz), limit-at=1024K/1024K, max-limit=1024K/1024K} Two: limit the maximum number of threads per machine : for, wbsz, from, 1, to,, do={/ip, firewall, filter, add, chain=forward, src-address= (192.168.0.. $wbsz), protocol=tcp, connection-limit=50,32, action=drop} Three: port mapping IP, firewall, NAT, add, chain=dstnat, dst-address= (34), protocol=tcp, dst-port=80, to-addresses= (), to-ports=80, action=dst-nat Four: end slogan / IP firewall filter Ad, CH, forward, PR, TCP, dst-po,, act, drop, comment=, Blockade, QQ Five: more variable telnet service port /ip, service, set, Telnet, port=23 Six: more change SSH management service port /ip, service, set, SSH, port=22 Seven: change the WWW service port number /ip, service, set, WWW, port=80 Eight: change the FTP service port number /ip, service, set, FTP, port=21 Nine: increase this ROS management user /user, add, name=wbsz, password=admin, group=full Ten: delete speed limit script : for, wbsz, from, 1, to, 254, do={/queue, simple, remove (wbsz. $wbsz)} Eleven: seal IP footsteps / IP firewall filter Add, chain=forward, dst-address=8/32, action=drop, comment=, Blockade, QQ. Twelve: banned P2P script / IP firewall filter Add, chain=forward, src-address=/24, p2p=all-p2p, action=drop, comment=, No, P2P Thirteen: limit the maximum number of TCP threads per machine (thread number =60) / IP firewall filter Add, chain=forward, protocol=tcp, connection-limit=60,32, action=drop \ Disabled=no Fourteen: one-time binding all online machines MAC Foreach, wbsz, in=[/ip, find, dynamic=yes, ARP] do=[/ip, ARP, add, copy-from=$wbsz] Fifteen: remove the bound MAC Foreach, wbsz, in, [/ip, ARP, find], do={/ip, ARP, $wbsz}, remove,