电池充电器（Battery charger）.docVIP

电池充电器（Battery charger） Introduction The following conditions are available for a battery of measuring instruments It is obvious that the power supply of the instrument is continuously reliable for a long time, Safe to use and longer to live. Similarly, chargers should be simple and easy to use and be available in the shortest possible time During the period of time, smart charge the battery to the maximum amount. If necessary, use the mains or 12V The direct current supplies the external power to the instrument. This issue of the newsletter introduces some batteries, chargers, and batteries Supplementary information on network power technology. For all Leica instruments This information will help you to achieve the most lasting and reliable Power supplies. Battery At present, Leica uses a variety of different models of batteries In fact, its a built-in battery in the battery that defines the battery Model. The type of core battery includes: lithium battery (also called lithium ion battery) Chi pool (English abbreviation: Li-Ion), nickel hydrogen battery Write: NiMH) and nickel separator batteries: NiCd). The type of core cell is clearly marked on each cell. The following table, for some Leica instruments, the most commonly used batteries in the core Battery type is summarized. Instrument cell type core battery type System1200 GEB221 GEB211 Li-Ion Li-Ion TPS800/700 /400 GEB111 GEB121 NiMH NiMH TPS1100 GEB111 GEB121 NiMH NiMH System500 GEB121 NiMH TPS1000 /2000 GEB187 NiMH External battery GEB171 GEB70 NiMH NiCd Attachment flash - No. 6 Batteries, chargers and power supplies All new batteries need to be fully discharged before use And charging - called regenerative cycles (or: recovery cycles, or more) New cycle and rebirth cycle: Refresh cycle). The easiest way to perform a regenerative cycle is to use it GKL221 professional charging station regeneration (or: restore, brush) New english: Refresh) function Direct press GKL221 Select the button on the charger and hold