2011 Standard for Requirements for the （2011标准的要求）.pdfVIP

ANSI/AHRI Standard 280 2011 Standard for Requirements for the Qualification of Reverberation Rooms in the 63 Hz Octave Band Approved by ANSI on April 17, 2012 IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or guarantee the safety of any products, components or systems designed, tested, rated, installed or operated in accordance with this standard/guideline. It is strongly recommended that products be designed, constructed, assembled, installed and operated in accordance with nationally recognized safety standards and code requirements appropriate for products covered by this standard/guideline. AHRI uses its best efforts to develop standards/guidelines employing state-of-the-art and accepted industry practices. AHRI does not certify or guarantee that any tests conducted under its standards/guidelines will be non-hazardous or free from risk. Note: This standard supersedes ANSI/AHRI Standard 280-2008. Price $10.00 (M) $20.00 (NM) ©Copyright 2011, by Air-Conditioning, Heating, and Refrigeration Institute Printed in U.S.A. Registered United States Patent and Trademark Office TABLE OF CONTENTS SECTION PAGE Section 1. Purpose1 Section 2. Scope1 Section 3. Definitions1 Section 4. Reverberation Room Qualification and Testing Procedures 2 Section 5. Conformance Conditions 3