Computer Simulation and Analysis of High （计算机仿真和分析的高）.pdf

Computer Simulation and Analysis of High-precision Automated Assembly Line in Telecommunication Industry Wei Pan Yingbin Shi Advisor: Prof. Jeremy Li Session: Tools, techniques, and best practices of engineering education for the digital age Abstract In this project, a mechanism for inserting assembly technology is described. The process is separated into two portions : pick-up and assembly. In the pick-up portion, process planning for industry assembly is a very complex task, which is mostly dependent upon the combination of experience along with up-to-date assembly technology. Attempts to simulate the automated assembly process have been largely unsuccessful and it remains a difficult task especially for current college student majoring in manufacturing, in the field of mechanical engineering. Besides pursuing automating assembly process planning, this research also investigates the effectiveness of assembly simulation as a project for groups of graduate students by using computer-aided design. Student can view assembly simulations through Pro/E software. The research was accomplished by reviewing process plans from different groups of graduate students and presents the best result to establish a baseline of process plan complexity, which shows huge gaps between college study and current leading manufacturing industry. 1. Introduction In classroom lectures, we not only learn how to do design in the pro/Engineering simulation system, but also launch some simple warm up projects with which to start. All students are divided into several groups at their own request, group discussion helps in team building and the ability to handle the project as a group. Different groups and different warm up projects help reduce copying from each other. All these basic projects contribute to and regulate their path to industry design. There are thousands of different ways to design an assembly lin