DIELECTRIC SYSTEM FOR SUBMARINE ELECTRO （为海底电绝缘系统）.pdf

Return to Session DIELECTRIC SYSTEM FOR SUBMARINE ELECTRO HYDRAULIC UMBILICAL UP TO 35KV Mario Daniel TEIXEIRA JUNIOR, MDR Consultoria, (Brazil), mariodaniel@ Luciana ABIB, Marine Production System do Brasil, (Brazil), Labib@ ABSTRACT The main purpose of this technical paper is to analyse the Each design is property balance mechanical, thermal and various kinds of polymeric insulations currently available for electrical evaluation, for static and dynamic operation in use in power cables, with insulation voltage up to 35kV, for subsea application up to 3000 meters water depth and a application as a component of Submarine Electro Hydraulic service life of 25 years. Umbilical. A typical subsea multiphase pump may need a megawatt or The umbilical application could be interconnect offshore oil more of electricity and some fields need more than one platforms or supply electrical energy for down hole, deep pump. Normally, each pump is fed by its own Variable water, oil pumps. Frequency Driver (VFD), requiring one 3-phase cable per Analysis must take in account the dielectric system, pump. comprised of the conductor shield – insulation – insulation Detailed analysis and rigorous tests are performed to ensure shield. The single and simple analysis of the insulation, in the umbilical systems reliability during installation phase and the event of cables for medium voltage, becomes partial and during throughout service life. Crush, bending, tensile and must be complemented by the specification and definition of cycle tests verify umbilical behavior under a broad range of requirements for the semiconductor materials components