DLP7970ABP（DLP7970ABP）.pdf

DLP-7970ABP DLP-7970ABP BoosterPack User’s Guide BoosterPack User’s Guide FEATURES: • 13.56MHz HF RFID Reader/Writer • Compatible with the NFCLink Library • Compatible with the MSP-EXP430G2X LaunchPad • Compatible with the MSP-EXP430F5529LP LaunchPad • Compatible with the C2000 LaunchPad • Compatible with the TIVA C Series LaunchPad • Compatible with the Hercules LaunchPad • Supports ISO 15693, 18000-3, 14443A/B and FeliCa • RFID/NFC Reader, NFC Peer or Card-Emulation Mode • NFCIP-1 (ISO/IEC 18092) and NFCIP-2 (ISO/IEC 21481) • On-Board Antenna • FCC/IC Approvals in Place • Operational Power Supplied by the LaunchPad 1.0 INTRODUCTION The DLP-7970ABP is an add-on board designed to fit TI’s MCU LaunchPads that incorporates DLP Design’s DLP-RFID2 RFID module. This BoosterPack allows the software application developer to get familiar with the functionalities of the TRF7970A multi-protocol, fully-integrated, 13.56MHz RFID/NFC IC on their Texas Instruments embedded microcontroller platform of choice without having to worry about developing the RF section. The NFCLink library is an industry-proven modular firmware/software solution that provides a programming interface for TI’s family of TRF79XX NFC devices supporting the hardware level up through the host operating system via an API. NFCLink is a library of NFC and HF RFID firmware using the NCI protocol to communicate with a host OS or MPU. NFCLink currently supports MSP430 5XX and 6XX series devices. Visit the TI website for more details: /tool/nfclink This document provides direction for TRF79XX users implementing a 13.56MHz RFID reader solution using the TRF79XX IC connected to a Texas Instruments embedded microcontroller or microprocessor development platform. Examples of such development platforms are the MS