ENGINEERING DRAWING CBSE（工程制图方式）.pdf

ENGINEERING DRAWING Time allowed : 3 hours Maximum Marks : 70 GENERAL INSTRUCTIONS : (i) Attempt all the questions. (ii) Use both sides of the drawing sheet, if necessary. (iii) All dimensons are in millimeters. (iv) Missing and mismatching dimensions, if any, may be suitably assumed. (v) Follow the SP : 46-1988 codes. (with First Angle method of projection). QUESTION PAPER CODE 68/1 1. (a) Construct an isometric scale. 5 (b) A hemisphere of diameter 84 mm, is having its circular face, parallel to HP on the upper side. An equilateral triangular prism of base side 40 mm and length 50 mm, with its axis perpendicular to VP, is resting centrally on it, on one of its rectangular faces. Draw its isometric projection. Give all dimensions. 13 (c) A frustum of a cone with its base diameters of 60 mm in front and 40 mm at the back, length of axis being 75 mm, is having its axis perpendicular to VP. Draw its isometric projection. Give all dimensions. 7 2. (a) Draw to scale 1 : 1 the standard profile of a metric screw thread (external), taking enlarged pitch = 45 mm. Give standard dimensions. 9 OR Draw to scale 1 : 1 the front view, side view and top view of a hexagonal nut of size M 30, keeping its axis vertical. Give standard dimensions. (b) Sketch free-hand the front view and top view of a countersunk head rivet of diameter 20 mm